How do I install the Panel Mount Antenna?

HTTP Aggregation & its Exclusion

Antennas and Boosters for Mushroom i-Series Products

How do I verify that VLL is working as expected, from the client?

How can you route specific incoming traffic on VLL, to required interfaces on the server?

How many SIM cards can I plug in into the Portabella 4000it-5G unit?

Voice traffic prioritization using layer 7 filters

How do I export performance tab data

How do I change the Default LAN IP address?

How do I configure the GUI password on Mushroom for firmware 1.18 or older?

License Key Activation Guide

What protocols are supported for layer 7 filters

How does the Elastic IP address assignment work?

How to disable the SIP ALG option?

How to assign an IP/subnet for each LAN port?

Can I use the car cigarette lighter socket to power on Mushroom Networks device?

How to troubleshoot cell modem connectivity

How do I allocate bandwidth for different traffic types (Internet, VoIP-armor/VLL) using QoS reservations?

How can I check the aggregated speed with speedtest.net?

How can I remotely access my device?

How can I speed test with multiple streams?

Which tunnel is recommended if I want aggregation with cellular cards?

What are the authentication types on Mushroom devices for software version 1.19 or later?

Mushroom Networks family of products

Can I use an external battery to power up Portabella or Streamer devices?

How can I override the MTU on WAN/Cellular interfaces, set by a DHCP server?

What is Additional/Alternative NTP server section used for?

What are the “Components of Interface Groups” in version 1.17 and later?

How to configure WiFi on my Mushroom Device?

How do I use tcpdump with the diagnostic tools?

How do I setup VLAN both on the LAN and WAN interfaces?

How do I find IMEI and other detailed information about my cellular modems?

How do I configure Diagnostic Tools?

How do I change MTU on the WAN interfaces?

How do “Load-Balancing Weights” with Interface Groups work in version 1.17 and later?

How can I load balance HTTP/HTTPS traffic using HTTP Aggregation Weights?

How can I have multiple/additional subnets on WAN interface in passthrough setup?

How can I check the model of my device?

How can I enable VLAN Access?

How can I change the DNS server?

What are “Interface Options” or “Flow Pinning” in version 1.17 and later?

What is a “Random Group” interface in version 1.17 and later?

What is the VLL tunnel security?

What is the difference between “Connection Routes” and “Advanced Routes” and when should I use each?

Are Mushroom devices impacted by Intel vulnerabilities?

What are the different Software Support Package types?

What is Netflow settings section and how can I use it?

How do I check if my VPN connection is working?

How do I debug my voice/SIP traffic issues?

How can I enable experimental features?

What changes are required on the VLL/VoIP Armor server for firmware release 1.17 ?

How do I Connect AT&T cellular modem to the Internet using my PC?

How do I configure VOM for streaming to facebook?

How can I verify if my Streamer is working properly?

Why is my Streamer output video not playing smoothly?

Can you discuss the Streamer VOM Status Table?

How can I set the Max Rate per WAN Link (kbps) on Streamer?

How do I configure a cellular modem?

What is Portabella 8000 port mapping?

How do I configure ‘Auto Connect’ for MiFi 620L modem?

How do I configure Netflow settings?

How can I setup VLAN with tagging?

How can I enable “Capture All” in firmware version 1.17 and above?

How can I enable “Include HTTP” in firmware version 1.17 and above?

How do I configure and use VOIP Armor in firmware version 1.17 and above?

What were the changes in firmware version 1.17 (Interface Groups, Manual Network Routes, VoIP Armor)?

How do I add a certificate on Mushroom device?

How can I validate the status of a wired WAN?

How can I check the connectivity to the Internet?

How to load balance traffic using interface groups?

How do I use interface binding in firmware version 1.17 ?

How to add additional LAN subnets on mushroom ?

VoIP armor configuration

Mushroom Configuration Guide

User Manuals

Mushroom Video Armor products

How do I use the Interface Groups feature on the mushroom ?

What ports need to be opened up for Video services?

My ATT cellular modem is not getting connected.

CLI User guide.

How do I install TruffleV with VMware ?

How to setup L2L Ipsec with the mushroom ?

How to setup DMVPN with mushroom’s VLL ?

Truffle System Power Consumption Measurement

How do I connect my cellular cards to the mushroom ?

Fan control on Truffle E/EC/EF/EX

Truffle console access

My IPSec VPN is not working

How do I direct inbound traffic through Mushroom?

How do I do the network scan for available wireless networks?

Can I direct all my outgoing traffic to one of the WAN links with no NAT?

Steps to add SNMP Trap Receiver sensor in PRTG

Steps to check whether the device is reachable and add sensors in PRTG

How can I put a specific LAN user traffic on a certain WAN line

PRTG – Syslog Receiver

Bandwidth Monitoring using PRTG

Are there stencils available for Truffle?

What is the Mushroom Configuration Reset USB key and how do I use it?

What is the Mushroom System Recovery USB key and how do I use it?

VPN Failover 2 WAN setup Diagram

What is the difference between 1.15.0 and 1.16.0 release?

What are the Streamer LED lights indicating?

QoS shaping parameters

Some websites are being blocked through the BBS connection. How do I fix this?

End of Life dates for older Mushroom Networks products

Configuration back up

I cannot access Mushroom device using GUI

WAN connections keep failing

Can I bind all email traffic to WAN1?

My WAN lines show connected on the Truffle, however I can not surf the web, how can I fix this?

VPN bonding using VLL connection

Truffle Lite console access

What does my USB Reset Key look like?

What ports need to be opened up for VLL

Why is my new firmware version not showing after firmware upgrade?

Connection drops with some web sites, how can this be resolved?

Passthrough configuration checklist

cli commands

Verify if my multiple links are being utilized

SMTP failover

Sprint 341u support on Mushroom devices

How can I route a subnet onto a specific WAN link?

MPLS installations

Multiple subnets on VLL

How do I enable WiFi on the Portabella8000, Streamer8000 or Teleporter?

How do I set up VLL as hub and spoke?

How can I use my own decoder or software decoder with my Teleporter Receiver (BPA)?

How can I encrypt VLL traffic?

Can I change DHCP behavior for a specific host

What is “include http” option for the VLL tunnel? Should I check it?

How do I stream to Youtube live using Streamer PRO?

There is no video coming through the Teleporter or Streamer PRO? What could be wrong?

Hub and spoke (star topology) VLL configuration example.

How can I turn off NAT?

What is QoS and how do I setup QoS shapers on Mushroom?

How can I test Remote LAN (VLL) throughput

How do I access command line interface on Mushroom devices

How can I use release candidate firmware

Is there a detailed VLL / Remote LAN configuration examples document?

Is there a quick install guide?

What is VLL (Virtual Leased Line)?

How do I prioritize VLL traffic using QoS?

How do I prioritize (set QoS) for VOIP / SIP traffic?

What is a Manual Network Route and how do I configure it?

Does BBNA support High availability or VRRP?

What is Maintenance mode?

What is Connectivity Check Settings?

How do I configure Interface binding rule? Can you give examples?

What is dynamic DNS feature in BBNA and how do I configure dynamic DNS?

How do I configure Passthrough mode in BBNA?

How do I connect the BBNA to my network?

What is Inbound Subnet Aliasing?

What is standby mode for WAN links in BBNA?

How do I configure my Wired WAN connections on BBNA?

How do I connect my broadband modems to my Mushroom Networks device?

How can I access the user interface of BBNA?

How do I access the user interface of my Mushroom Networks unit?

How come I am not seeing a newer firmware revision after upgrade and reboot?

My Truffle does not appear to be bonding. What could be the issue?

Is it possible to access the Mushroom Networks unit without being directly connected?

How can I block specific websites using the Truffle?

Is there a quick install guide for Truffle?

What are the priorities amongst the Interface Binding rules and when are they active?

Interface Names on Truffle products

How can I reset my password for my Truffle unit?

How do I setup 1-1 NAT on Mushroom device?

What is the Mushroom factory reset USB key and how do I use it?

Packet Loss in the network

Shortel phones Mushroom debugging

Passthrough mode mac address mapping

How do I handle multiple subnets on my WAN lines from the same ISP?

UML295 support on Mushroom devices.

VPN failover on firewall connected to Mushroom device

How do I setup PPTP VPN on Mushroom?

How can I effectively utilize lines with 2 different characteristics, e.g DSL line and Wireless/Satellite link?

Cannot ping the IP address assigned on Mushroom device

Fan control on Truffle4000/8000

Connections keep cycling

Port forwarding (to access RDP from internet)

How to create a VLL client server connection

Front panel LCD button sequences (for factory default, password reset, displaying LAN IP)

How can I upgrade the firmware on my Mushroom device?

How to setup the device in Pass Through mode?

How can I fix my WAN lines cycling though “Acquiring IP address” ?

How can I change the sender email address in BBNA?

Can VPN be used along with Mushroom unit?

I have had many users experiencing issues of their emails being bounced back by other SPAM filters. The only thing that has changed on our network is the installation of the BBNA. Did I miss an important step in the installation?

Need to perform Inbound port forwarding, block certain kinds of outbound traffic or perform NAT for certain internal IP address subnet. How do I do this?

How can I make traffic to a certain site go over a specific line?

Where can I find the MAC addresses?

USB-Ethernet provisioning for portabella,teleporter, streamer, etc

Factory reset Mushroom device

Adding a Manual Network Route

How do I assign my IP address on my ISP links to a device behind the BBNA?

What is capture all mode for remote LAN / VLL setup (older firmware 1.16.3 and below)?

What is standalone mode and what is peered mode for Truffle units?

Why is my speedtest showing unexpected results?

Do I need to reboot the Truffle for my newly added firewall rules, interface binding rules, or QoS rules to become active?

How can I prepare my Verizon 4G UML290 wireless card for BBNA devices?

Enable Experimental Features

Change DNS server

What changes were made in 1.17 (Interface Groups, Manual Network Routes, VoIP Armor)?

How do I set QoS reservations on BBNA?

What is the default login and password for the Truffle and Truffle Lite?

SNMP support on Mushroom device

Wired WAN configuration checklist

Connectivity to the Internet

1.17 Configuration Guidelines

Enable VLAN Access

How to configure Netflow settings

How to setup VLAN with tagging

How to configure the UI password on Mushroom for firmware 1.18 or older?

Authentication types on Mushroom from 1.19

Advanced firewall rules

Can I set email alerts for events in my BBNA?

How do I configure my BBNA to access it remotely?

What is Remote Syslog?

What is HTTP load balancing weights?

Mushroom Networks Documentation

Port forwarding (to access RDP from internet)